The importance of floor sanding and how to get it done?

When it comes to antique building with timber flooring, you might have noticed the floor looking dull, wasted, dirty and dingy. The reason is that the luster of fresh polish has long since evaporated and despite herculean cleaning efforts, it still manages to retain its dingy look. The only respite to the otherwise dingy look that you can look forward to is the smell of freshly used cleaning detergents. And this is where floor sanding comes in – floor sanding is the process by which old, timber flooring is renovated back to their original glow and finish and one that almost all commercial establishments use, to maintain their wooden floors. If you still want to know more about the process itself, do read on.

  • Use the grit: When it comes to sanding a floor, the first thing that you need to do is to remove the old paint, remnants of old finish along with any scratches and dents of the wooden floor. This should help to effectively remove all the extras of the wooden floor and return the timber back to its natural state.
  • Use different graded sandpaper: If you thought that sanding a floor is easy, think again. For example, if the wooden floor has a coating of shellac paint on it, then you may need to sand more aggressively. The point being that the grit sequence you use would differ from one floor to the other and depend more on the contaminants contained on the floor, as well as its current condition. And when you sand the floor, it would be better to do multiple passes rather than just depend on a single pass since that rarely does anything much. More importantly and it goes without saying that you need to have dust extractors ready since sanding is dirty work. If you need more tips, just search online for parquet floor sanding as that should give you all the tips you need.
  • Staining: If you prefer to have the wooden floor stained, rather than to maintain the natural color of the wood, then you can get it done after the sanding process is complete. Sanding the floor should take anywhere from three to four days to get completed. Once it has been sanded, thoroughly, then you can stain the floor but make sure that you apply at least two coats of the same, for the perfect look. If you feel that you cannot handle this part of the project on your own, you can always call in for some professional help by Googling dust free floor sanding and that should help list out all the professionals in your area.
  • The finish: Once you have completed staining the dry floors all that is left for you is to apply the finish. First, you must wait for the floors to dry out and once they have, then you can apply polyurethane lacquer. The lacquer should help provide the perfect finish to the wooden floor and make it glow resplendently. It would be hard to believe that the total transformation the wooden floor has undergone but that is pretty much what it is all about. Do remember that you may need to do this periodically, especially if you happen to own the building.

These steps should help explain what floor sanding is all about and why it is more than necessary. If your building has timber flooring, then you would need to sand it often to ensure that it continues to look outstanding and does not get too dingy to look at. With periodic sanding and proper finish, your wooden floors should stand out for the right reasons. It would be a good idea to consult a professional and get them to handle the project since they would naturally have the required experience and expertise on the same.

Avatar

Written by Jason

Hello there! Thank you for stopping by Interead, and I am Adam, the mastermind behind this versatile blog. At Interead, I like to cater to basic issues regarding technology, fashion, home decor, and more for my readers so they could benefit from every post. Have a good read!

Leave a Reply

Your email address will not be published. Required fields are marked *